DANNMAR D4-12 12,000-LBS. CAPACITY FOUR-POST LIFT

Dannmar’s four-post D4-12 lift is designed to work with most vehicles. With a 12,000 lb. capacity you not only know that it is capable of lifting most anything, but it also has to be built very strong, rugged, and durable. With Dannmar’s extended runways, moving onto the runway is safe and simple for vehicles of all sizes.
The quality built into each Dannmar lift is demonstrated by the Dual-hub cable sheaves that reduce stress, fatigue and wear. Huge 10.5” diameter cable sheaves within the runway and cross tubes combine with massive 2.25” diameter sheave axles. These larger components help to share the load, which dramatically decreases cable wear and increases critical component lifespan.
To help raise and lower the hefty 12,000 lb. load are a series of heavy-duty aircraft cables. The Dannmar D4-12 incorporates four, 1/2” diameter, stainless-steel lifting cables specifically designed for lifting applications. To keep everything moving freely, the Dannmar D4-12 utilizes built-in lubrication points located on each sheave and sheave axle.

Features

CE Approved and Certified
Meets or exceeds the standards prescribed by European Standard EN-1493
Mid to long-style approach ramps for low-ground clearance vehicles
Runways include rail-kit for optional accessories
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks and sheaves
Internal anti-sway slider blocks in each column
Pneumatic push-button safety release
Heavy-duty 1/2” aircraft cable and 1.75” roller axles
Safety locks enclosed in columns minimize pinch points
Oversized sheave diameter reduces cable fatigue
Large self-lubricating cable rollers
Multi-position safety locks in each column
Customizable power unit location
Approach ramps incorporate built-in rear-wheel chocks
Independent backup slack-cable safety latches
Runways feature non-skid surface
ETL approved

Specs

SKU#
5175317

Lifting Capacity
12,000 lbs. (5,443 kg)

A – Min. Runway Height
6.75″ (171 mm)

B – Max. Rise
68.75″ (1,746 mm)

C – Max. Lifting Height
77.5″ (1,969 mm)

D – Ramp Clearance* (Max. Rise)
49″ (1,245 mm)

E – Height of Columns
92″ (2,337 mm)

F – Drive-Thru Clearance
98” (2,482 mm)

G – Overall Width
127.5″ (3,239 mm)

H – Width Between Columns
115.75″ (2,940 mm)

I – Overall Length
233.5″ (2,940 mm)

J – Outside Columns
115.75″ (2,940 mm)

K – Width Between Runways
34.5″ (876 mm) or 41.5″ (1,054 mm)

L – Runway Centerline
54.5″ (1,384 mm) or 61.5″ (1,562 mm)

M – Outside Edge of Runways
74.5″ (1,892 mm) or 81.5″ (2,070 mm)

N – Runway Width
20″ (508 mm)

O – Length of Runways
194.75″ (4,947 mm)

Min. Wheelbase @ Rated Capacity
140” (3,556 mm)

Min. Wheelbase @ 75% Capacity
120” (3,048 mm)

Min. Wheelbase @ 50% Capacity
100” (2,540 mm)

Min. Wheelbase @ 25% Capacity
80” (2,032 mm)

Locking Positions
15 (spaced every 4” / 102 mm)

Time to Full Rise
60seconds

Motor
220 VAC / 60 Hz / 1 Ph